Adventurer 3.5 Self Inflating Mattress

Colour of Product: Lime
Primary Material: Anti-Fungal PU Foam
Weight: 0.775 kg
Height: 183 cm
Width: 51 cm
Depth: 3.5 cm

Features:

• Durable brass valve
• Diamond diecut foam pattern
• Anti-fungal PU foam
• Tapered mummy profile
• R value 3.5 - 4.5
• Dimensions : 183 x 51 x 3.5 cm / 775 grams

Includes:

• Stuff sack
• Velcro Strap
• Repair Kit

To inflate:

• Step 1: Check the ground for any sharp objects that could damage or puncture the mattress. Unroll mattress and lay at on the ground you have checked.
• Step 2: Undo valve anti-clockwise and allow air to be drawn in, inflating the mattress.
• Step 3: Once fully inflated, close valve clockwise. If extra firmness is required, blow extra air into the open valve, then close valve with mouth still on valve.

To deflate:

• Step 1: Fully open valve anti-clockwise
• Step 2: On a flat surface, roll the mattress up towards the open valve – expelling air through the valve
• Step 3: Once rolled up close the valve clockwise to prevent more air from being drawn in. Unroll the mattress and fold in half. Roll the mattress up a second time toward the closed valve. This second roll will force more air up towards to valve end, once you are close to the valve open it again to expel the final amount of air.
• Step 4: Close the valve again, and use the supplied Velcro strap to keep the mat rolled up tight.

Caring for your Self Inflating Mattress

It is not recommended to store your mattress rolled up in its storage sack for long periods. For maximum performance of your self inflating mattress, store the mattress fully expanded with the valve open. This allows any moisture from your breath trapped inside to escape and dry out during storage. Storing the mattress fully expanded will maintain the memory of the foam, this allows the full potential of the foams’ 
expanding power when it is self inflating the mattress.

To clean your mattress, inflate the mattress and ensure valve is closed. Use a mild soap and warm water to spot clean dirty areas, rinse with fresh water and air dry out of direct sunlight.

ALWAYS ensure mattress is dry before storing.
KEEP AWAY from any open flames, sparks and embers
DO NOT use an air pump or compressor to inflate the mattress. 

Before the first use of your Self Inflating Mattress

Your 360 degrees Self Inflating Mattress will take longer than normal to self inflate the first time out of the packaging. It is recommended to condition your mattress before first use. 

• Step 1: Unroll mattress and lay at on the ground.
• Step 2: Undo valve anti-clockwise and allow air to be drawn in, inflating the mattress – this will take several minutes – longer than normal use once the mattress is conditioned.
• Step 3: Once fully inflated blow extra air into the open valve, then close valve with mouth still on valve.
• Step 4: Store the mattress fully inflated for at least a day before rolling up and using for the first time.